for companies only


Measuring device for the positioning of tool changer systems
The alignment is done by a "measuring method" with an exact measuring result.
- Measuring the offset between tool holder and tool changer in x and z direction as absolute value
- determination of distance between gripper and spindle
- easy and safe handling
Application
Alignment of
- Magazine to tool changer
- Pick-up magazine to spindle
- Tool changer to spindle
You can measure the axial distance of the contact surfaces / the center offset to the tool spindle and to the tool magazine (transfer of the values to the machine control) / the correction direction and the correction path / various offset tolerances.
2 Components - 1 Unit
One component is the measuring unit (dial gauge) for determining and displaying the center offset and the axial distance by means of a direction pointer.
The correction dimension must be set.
The second component is the test fixture in common ISO standards.



1. insert test fixture 2. insert measuring unit 3. bring components together 4. apply stylus and measure

Please select the desired interface:


Alignment device Calibrit Easy
The alignment is done via a "probing procedure" with an "okay" / "not okay" result.
- Measuring the offset between tool holder and tool changer in x and z direction as absolute value
- determination of distance between gripper and spindle
- easy and safe handling
with the Calibrit Easy2.0 aligment device, it is also possible to:
- determine the angular position (position of the groove in the spindle to the position of the groove in the gripper groove
Application
Alignment of
- Alignment of tool changer with gripper arm to chain or disc magazine
- Alignment of chain or disc magazine to tool spindle
- Alignment of transfer unit or swivel unit to chain or disc magazine
3 Components - 1 Unit
The Calibrit Easy aligment device consists of a spindle cone (1), a gripper disc (2) and a staking pin (3).



1. insert test fixture 2. insert measuring unit 3. bring components together 4. stake out bolt
Please select the desired interface:


Alignment device Calibrit Easy
The alignment is done via a "probing procedure" with an "okay" / "not okay" result.
- Measuring the offset between tool holder and tool changer in x and z direction as absolute value
- determination of distance between gripper and spindle
- determine the angular position (position of the groove in the spindle to the position of the groove in the gripper groove
- easy and safe handling
Application
Alignment of
- Alignment of tool changer with gripper arm to chain or disc magazine
- Alignment of chain or disc magazine to tool spindle
- Alignment of transfer unit or swivel unit to chain or disc magazine
4 Components - 1 Unit
The Calibrit Easy aligment device consists of a spindle cone (1), a gripper disc (2), a staking pin (3) and a positioning pin (4) for determining the angular position.


Please select the desired interface:

| Where you can find us
| Address
WSW Spannwerkzeuge-Vertriebs GmbH
Maybachstrasse 1
73066 Uhingen
Germany
+49 (0)7161/93040-30
